Total:  $0

Crack monitor zi-2s (Tell-Tale Combo). Kit 10 pcs + selected components

Buy Crack monitor zi-2s (Tell-Tale Combo). Kit 10 pcs + selected components

Kit consists of 10 gauges for monitoring cracks and additional components of your choice.

Warehouse (Russia): In stock
$52
Сообщить о поступлении
Сообщить о поступлении товара
Ваша просьба принята!

Вы получите уведомление о поступлении товара в продажу на указанные Вами контакты
Ваш E-Mail
Актуальность
- обязательно к заполнению
Проверка...

Crack monitor Zi-2s - Gauge for monitoring cracks (Tell-Tale Combo). Kit of 10 pieces + selected components


Kit consists of 10 gauges for monitoring cracks and additional components of your choice for professional monitoring and documenting condition of cracks in buildings and civil engineering structures


Crack monitor zi-2s is developed in some modifications with supplements and tools. Construction of this model fits into specific requirements of a buyer. A buyer determines, how a crack monitor will look and what options are included in ordered tools.

To make an order you should choose one of eight modifications, and then point necessary additional options. The order is preparing for delivery to the buyer very fast - during 1-3 days, depending on quantity of ordered monitors and chosen options.

Modifications of crack monitors zi-2s:

Modification

Description of modification

Sketch

Elements of monitor construction

Metallic reference points

Mounting plates

Clue layer (sticky pads)

1

zi-2s

Basic

-

-

-

2

zi-2s (P)

Pro

+

-

-

3

zi-2s (H)

High basic

-

+

-

4

zi-2s (PH)

High pro

+

+

-

5

zi-2s (A)

Basic with clue layer (sticky pads)

-

-

+

6

zi-2s (PA)

Pro with clue layer (sticky pads)

+

-

+

7

zi-2s (HA)

High basic with clue layer (sticky pads)

-

+

+

8

zi-2s (PHA)

High pro with clue layer (sticky pads)

+

+

+

Designation

P - Reference point (of stainless steel)
H - Mounting plate (2 mm thickness)
A - Sticky pads (clue layer, thickness 1.5 mm)

Additional options:

  • Branding – placing of logo and information about buyer (phone number, site and so on) on the gauge scale. Branding is made with weatherproof polymer sticker.
  • Clamp is applied for fastening of crack monitor plates in zero position for the period of mounting.
  • Marking gauge-ruler – used as comparator for measuring of crack width and for marking of holes for dowels to fasten crack monitor.
  • Mounting plates are fastened to crack monitor plates for adjusting of mounting height on uneven surfaces in the site of fastening to constructions under observation.
  • Adjusting plate is used for provision of split between scale and transparent crack monitor plate. The split allows to compensate possible deformations (movements) of observed construction from the mounting monitor surface, that provides its integrity (not damageability) and possibility of long-term observations.
  • Angle element is used for mounting of crack monitor on the corners of constructions. It is fastened to one of plates of crack monitor with clue.
  • Reference screws are used as reference points for exact observations with electronic caliper gauge. They may be screwed into crack monitor or in adjusting plates.
  • Hex key is used for screwing of reference screws.

Technical characteristics

At observation over crack monitor scale

  • Range of observations along the axis Х -20+20 mm
  • Range of observations along the axis У -10+10 mm
  • Division value 1 mm

At exact observations over reference points

Range of observations along the axis Х -20+40 mm (in positive direction measures are possible at way out of indicative cross outside, e. g. more +40 mm)

Accuracy depends on used devices for measurement. It is recommended to apply caliper gauges digital (electronic) with accuracy of measurement to 0, 01 mm

Construction

The conceptual construction and particularities of crack monitors zi-2s are shown on the schemes:

Detailed scheme Crack monitor Zi-2s (Basic modification):



Fix using Screws or Adhesive (not included).
  1. Visual monitoring the movements in the two orthogonal axes, accuracy 1 mm.
  2. Instrumental monitoring of crack width with calipers (not included), accuracy 0,01 mm (0,0005 inch).

More information

Tools brand "zi-Monitor.com™" are designed and manufactured in Novosibirsk (Siberia, Russia). The manufacturer and brand owner Sole trader Bezrodnykh Alexei. Tools zi-Monitor.com used by professionals in surveying, inspectors and experts in buildings, engineering structures. The device passed field tests in harsh climatic conditions of Siberia over 3 years. The design of the device developed on the basis of practical long-term experience of Russian specialists taking into account modern trends and technologies of production.

Not all monitors cracks are the same!
Not all cracks monitors are the same 1 Not all cracks monitors are the same 2

Videotutorial


Possible device names in other languages:

Português: FISSURÔMETROS Españoles: FISURÓMETROS Italiano: FESSURIMETROS English: CRACK MONITORS (JOINTMETERS) Deutsch: RISSMONITOR (Riss-Messlehre, Rissobservator)Français: FISSUROMÈTRE (JAUGE FISSURES) Polski: RYSOMIERZRomână: FISUROMETRU (MONITORIZARE FISURI)Русский: ЩЕЛЕМЕР (МАЯК)

Characteristic flat
Quantity monitors in the kit 10
weight 0.4 kg

Tags: crack monitor jointmeter tell-tale zi-2s

Crack monitor zi-2s (Tell-Tale Combo). Kit 10 pcs + selected components reviews

Be the first to write a review of this product!